|
Здравствуйте.
Ситуация такая: в трубке тишина, входящий звонок не проходит, остальные порты в порядке.
16 <NetCon 33> : Found inbound voip peer by answer-address id(3000)
17 <H323 33> : local capabilities.
number of capabilities = 6
1 : g711alaw-64k
2 : g711ulaw-64k
3 : T.38
4 : UserInput/basicString
5 : UserInput/hookflash
6 : ATE:Payload101:0-15
18 <Q931 33> : Received SETUP from (192.168.61.1) : FastStart(1) Tunneling(1)
19 <H225 33> : Remote Endpoint (NULL,NULL,97,0,236)
20 <Call 33> : From Net - calledParty(283) callingParty(240)
21 <Call 33> : MatchedPerfect
22 <Call 33> : MatchAllProcess After Sorted
<0> id(200) dest(283) prefer(0) selected(13)
23 <Call 33> : Initiate callee with dial-peer(283) status(CalleeDeterminedAll) id(02b21f82-92ee-9fb3-057e-5634343434ef)
24 <Call 33> : Fail by Channel Busy
25 <Call 33> : Terminated from(fffffff7) this(Local:PortBusy) before(Local:PortBusy) forced(0) time(1281519487)
26 <Q931 33> : Send RELEASE COMPLETE
27 <NetEP 33> : Call FROM <192.168.61.1> terminated reason(Local:PortBusy)
V# sh voice port 0 / 1
Voice port slot(0)/port(1)
line type = FXS
status = Disconnecting
input gain = 0 db
output gain = 0 db
PSTN backup port enabled
ring frequency = 25 Hz
ring cadence = 1000 msec on, 2000 msec off
reorder tone duration = 30 sec
line lock tone duration = 30 sec
power down duration = 0 sec
polarity inverse = disabled
clear down delay = 0 sec
clear down tone detect = disabled
tie connection = none
description =
translate incoming called-number = -1
translate incoming calling-number = -1
comfort noise generation = enabled
dial tone generation = enabled
echo cancellation = enabled
announcement = enabled
low dtmf gain = -8
high dtmf gain = -5
caller ID = enabled
caller ID type = bellcore
caller ID NAME = enabled
DID Type = normal
busyout action = none
backup busyout action = none
current callnumber = -1
holded callnumber = -1
Что есть status = Disconnecting ??
shut\no shut на порту и перезагрузка шлюза не помогают..
|
Вход
Регистрация
FAQ
Поиск
