AP100B -> Avaya IPO 406 -> SIP server
При вызове с AP100B на внутренние номера звонки удачно проходят, при вызове с AP100B город... через пир 9[0-7]T вызов происходит, но обрывается связь при поднятии трубки вызывающего...
Код:
85 <Call 29> : ****** Call Created status(InitiatedByFXS) ver(8.28:2006-02-06-00-00) time(1797) ****
86 <CEP 000000> : Calling number(900)
87 <CEP 000000> : Call id(05070000-03f5-0824-800f-0002a4072174) callNum(29)
88 <Call 29> : Digit(9) at InitiatedByFXS
89 <Call 29> : MatchedPartially
90 <Call 29> : Digit(6) at CalleeUndetermined
91 <Call 29> : MatchedAll
92 <Call 29> : Digit(1) at CalleeDeterminedWaitDigit
93 <Call 29> : MatchedAll
94 <Call 29> : Digit(1) at CalleeDeterminedWaitDigit
95 <Call 29> : MatchedAll
96 <Call 29> : Digit(1) at CalleeDeterminedWaitDigit
97 <Call 29> : MatchedAll
98 <Call 29> : Digit(8) at CalleeDeterminedWaitDigit
99 <Call 29> : MatchedAll
100 <Call 29> : Digit(5) at CalleeDeterminedWaitDigit
101 <Call 29> : MatchedAll
102 <Time 29> : Inter digit timer timeout.
103 <Call 29> : Digit(#) at CalleeDeterminedWaitDigit
104 <Call 29> : MatchAllProcess After Sorted
<0> id(1005) dest(9[0-7]T) prefer(0) selected(1)
105 <Call 29> : Initiate callee with dial-peer(9[0-7]T) status(CalleeDeterminedAll) id(05070000-03f5-0824-800f-0002a4072174)
106 <NetEP 29> : InitiateOutCall: calledNum(9611185) callingNum(900) target(xxx.0.69.107)
107 <NetEP 29> : DoCall: calledAddr(96111xx@xxx.0.69.107) callingAddr(900)
108 <H323 29> : local capabilities.
number of capabilities = 5
1 : g7231A-6.3k
2 : g729-8k
3 : T.38
4 : UserInput/basicString
5 : UserInput/hookflash
109 <H225 29> : Try signalling TCP connect (xxx.0.69.107:1720)
110 <H225 29> : Signalling TCP connect success (29)
111 <Q931 29> : Send SETUP
112 <Q931 29> : Received CALL PROCEEDING
113 <H225 29> : Remote Endpoint (IP 406 DS,4.0 (10),180,0,10752)
114 <Q931 29> : Received ALERTING
115 <H225 29> : Remote Endpoint (IP 406 DS,4.0 (10),180,0,10752)
116 <Q931 29> : Received Progress Indicator : desc(8), coding(0), location(0)
117 <H245 29> : Send TCS request.
118 <Q931 29> : Send FACILITY
119 <H245 29> : Send MSD request.
120 <Q931 29> : Send FACILITY
121 <NetCon 29> : Alert received (inband tone explicitly).
122 <Call 29> : Alert from(ffffffff) pseudo(0) inband(1) status(CalleeInitiated)
123 <Q931 29> : Received FACILITY
124 <H245 29> : Received TCS ack..
125 <Q931 29> : Received CONNECT
126 <H225 29> : Remote Endpoint (IP 406 DS,4.0 (10),180,0,10752)
127 <Q931 29> : Received FACILITY
128 <H245 29> : Received TCS request.
129 <H245 29> : remote capabilities matching to local capabilities.
number of capabilities = 2
1 : UserInput/basicString
2 : UserInput/hookflash
130 <H245 29> : Send TCS ack.
131 <Q931 29> : Send FACILITY
132 <Q931 29> : Received FACILITY
133 <H245 29> : Received EndSession command.
134 <Q931 29> : Received RELEASE COMPLETE
135 <Call 29> : Terminated from(ffffffff) this(Remote:Unknown) before(NULL) forced(0) time(1812)
136 <CEP 000000> : DisconnectCall at Busy
137 <CEP 000000> : StopSignal
138 <CEP 000000> : Disconnect (0)
139 <NetEP 29> : Call TO <Unknown> terminated reason(Remote:Unknown)
140 <CEP 000000> : Disconnected(16) at Disconnecting
141 <CEP 000000> : Disconnected(16) at Idle
Прошу помощь в решение данной проблемы, опыт был с AP200B в реализации такого номерного плана... Но с AP100 сейчас пляски...