СвязьПроект

Не могу заставить работать AddPac. Подключил два обычных телефона к портам FSX. Настроил AddPac. Но гудка в телефонных трубка так и не появилось, как будто порты отключенны. Звоню на эти номера и порт всегда занят.
AP200# sh call history all

CallNum EventTime Descript CallingPartyNum CalledPartyNum RemoteInfo SetupTime Dur Reason
---------------------------------------------------------------------------------------------------------------------------------------------------
< 3> Oct 29 10:46:24 incomming 401 402 401:192.168.8.100 0 Local:PortBusy
< 2> Oct 29 10:46:15 incomming 401 402 401:192.168.8.100 0 Local:PortBusy
< 1> Oct 29 10:45:49 local 402 : 0 Local:InterdigitTimerExpired


Вот мой конфиг
!
version 8.237
!
hostname AP200
!
dhcp-list 0 type server
dhcp-list 0 address server interface ether0.0
dhcp-list 0 option dhcp-lease-time 7200
!
dhcp-list 1 type server
dhcp-list 1 address server 10.1.1.2 10.1.1.254 255.255.255.0
dhcp-list 1 option dhcp-lease-time 600
!
!
ip-share enable
ip-share interface net-side ether0.0
ip-share interface local-side ether1.0
!
interface ether0.0
ip address 192.168.x.x 255.255.255.0
!
interface ether1.0
no ip address
ip dhcp-group 0
!
snmp name AP200B
!
no arp reset
!
route 0.0.0.0 0.0.0.0 192.168.x.x
!
dnshost nameserver 192.168.x.x
!
service ez-setup
!
auto-script autorun.inf
!
!
!
!
!
! VoIP configuration.
!
!
! Voice service voip configuration.
!
voice service voip
fax protocol t38 redundancy 0
fax rate 9600
h323 call start fast
h323 call tunnel enable
local-ringback-tone early
busyout monitor gatekeeper
no busyout monitor callagent
busyout monitor voip-interface
display send e164
!
!
! Voice port configuration.
!
! FXS
voice-port 0/0
caller-id enable
!
!
! FXS
voice-port 0/1
description 403
!
!
!
!
! Pots peer configuration.
!
dial-peer voice 1 pots
destination-pattern 402
port 0/0
!
!
!
! Voip peer configuration.
!
dial-peer voice 1000 voip
destination-pattern [12345]..
session target 192.168.x.x
voice-class codec 1
dtmf-relay h245-alphanumeric
no vad
!
!
dial-peer voice 1020 voip
destination-pattern 0T
session target sip-server
session protocol sip
voice-class codec 1
dtmf-relay h245-alphanumeric
translate-outgoing called-number 1
huntstop
!
!
!
!
! Gateway configuration.
!
gateway
h323-id voip.192.168.1.210
!
! Codec classes configuration.
!
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g7231r53
codec preference 4 g7231r63
codec preference 5 g729
!
! Translation Rule configuration.
!
translation-rule 1
rule 10 0T T
!
translation-rule 2
rule 20 T 7495T
!
translation-rule 3
rule 30 810T T
rule 31 8T 7T
!
! SIP UA configuration.
!
sip-ua
sip-server 192.168.x.x
timeout treg 3600
timeout tregtry 600
register e164
!
! MGCP configuration.
!
mgcp
codec g711ulaw
!
!
! Tones
!
!
!

Подскажите пожалуйста. Просто уже ничего не могу придумать.

Мой debug
1 <Call 7> : ****************** Call Created status(InitiatedByNet) *******************
2 <SIP 7> : Receive INVITE Request
3 <NetCon 7> : Can not found suitable inbound voip peer - apply default
4 <Call 7> : From Net - calledParty(402) callingParty(401)
5 <Call 7> : MatchedPerfect
6 <Call 7> : MatchAllProcess After Sorted
<0> id(1) dest(402) prefer(0) selected(5)
7 <Call 7> : Initiate callee with dial-peer(402) status(CalleeDeterminedAll) id(00000000-0000-0000-0000-000000000000)
8 <Call 7> : Fail by Channel Busy
9 <Call 7> : Terminated from(fffffff7) this(Local:PortBusy) before(Local:PortBusy) forced(0)
10 <NetEP 7> : Call TO <401> terminated reason(Local:PortBusy)
11 <SIP 7> : Receive ACK Request
12 <SIP 7> : Set Terminated Success for 102 INVITE